Olitec RW400G Manual de usuario descargar pdf (Pagina 37)

5.8 Security

Figure 5-23: the Security menu

There are six submenus under the Security menu (shown in figure 5-23): Firewall, IP

Address Filtering, Domain Filtering, MAC Filtering, Remote Management and

Advanced Security. Click any of them, and you will be able to configure the

corresponding function. The detailed explanations for each submenu are provided

below.

5.8.1 Firewall

Using the Firewall page (shown in figure 5-24), you can turn the general firewall switch

on or off. The default setting for the switch is off. If the general firewall switch is off, even

if IP Address Filtering, DNS Filtering and MAC Filtering are enabled, their settings are

ineffective.

Figure 5-24: Firewall Settings

¾ Enable Firewall - the general firewall switch is on or off.

¾ Enable IP Address Filtering - set IP Address Filtering is enabled or disabled.

There are two default filtering rules of IP Address Filtering, either Allow or Reny

passing through the router.

¾ Enable Domain Filtering - set Domain Filtering is enabled or disabled.

- 33 -

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 64 65

Sin comentarios

Olitec RW400G Manual de usuario Pagina 37